Technical Informations / Applicatıon and Assembly Rules

CUTTING RAIN GUTTERS

Standard production length of the rain gutters and down pipes are 4 meters.  However, during assembly, they can conveniently be cut in necessary lengths with a sharp saw as no burr will remain. 

ASSEMBLING CLAMPS

Absolutely clamps should be used during application.  The distance between 2 clamps attached must not exceed 70 cm.  Furthermore, clamps must be placed as 3-5 mm sloped in 1 m rain gutter.  All nails of the clamp must be mounted as they clutch the rain gutter. 

JOINING THE FITTINGS

While joining the fittings with gutter, use of adhesive materials such as tangit in especially corner jointing is inconvenient since system looses its elasticity in different weather conditions. Ensure that the seals that will sustain tightness during joining are in the fittings.