Technical Specifications

SPRINKLER IRRIGATION SYSTEM PROJECTS

Triangular Layout
Square Layout
Rectangular Layout

Lateral and Sprinkler Intervals

Sprinkling Pattern Interval Sprinkler / Lateral
Triangle 18/18
18/24
24/24
24/30
Square 12/12
18/18
24/24
Rectangle 12/18
18/24

Sprinkler Intervals at Variable Wind Speeds

Sprinkling Pattern Wind Speed
(m/sec.)
Sprinkling
Interval
(m)
Squre or Rectangle No-wind
2.0
3.5
3.5
0.65dd
0.60dd
0.50dd
0.30dd
Triangle No-wind
2.0
3.5
3.5
0.75dd
0.70dd
0.60dd
0.35dd

SPRINKLER IRRIGATION SYSTEM PARTS

Water source and pump unit :A specific pressure is required for delivering water to the sprinklers.Required measures shall be taken while delivering irrigation water to the piping against substances which may block the system. 

Main pipe :It delivers water to lateral pipes.It can be employed as an underground or aboveground system optionally.Suitable diameter shall be preferred according to the received water quantities. 

Lateral pipe :They receive the water from main pipe and deliver it to the sprinklers.Their diameters are lower than the main pipe. 

Fittings:Used for joining pipes and sprinklers.These parts shall ensure a flexible connection, prevent leakage at joints under pressure, shall ensure drainage automatically when pressure is releases, offer convenient connection and disconnection actions and be resistant to abrasion. 

Sprinkler units :Sprinklers shall distribute the water to the field uniformly without causing surface flow or excessive drainage at the root section.Its performance impacts the entire system.